Assignment
Individual Assignment:
- Add an output device to a microcontroller board you've designed, and program it to do something.
Group Assignment:
Link to Group Work. Scroll to Week 9 - Output DevicesAdditional link to group work for Output Devices.
- Measure the power consumption of an output device.
Individual Assignment
- For the assignment this week, I took the microcontroller board I created and connected a servo to it. Week 8
- At first I had difficulty remembering wiich ports were which on the new board. So I had to refer to the pinout diagram for the RP2040.
- After several attempts I was able to program the servo to move through a sweep motion.
The Images Below.
![RP2040 pinout](../images/rp2040-pinout.png)
![Servo Output](./images/week9_servo.gif)
![servo code](./images/output_code.png)