Applications & Implications
Assignment Seventeen
This week I focused on the plan, scope, and remaining work for my final project.
System Integration
Assignment Sixteen
This week I created a system integration plan for my final project.
Wild Card & Digital Embroidery
Assignment Fifteen
This week I created digital embroideries and exlored miscellaneous digital fabrication techniques.
Interface & Application Programming
Assignment Fourteen
This week I programmed a graphic user interface to interace with a haptic motor attached to my development board.
Networking & Communication
Assignment Thirteen
This week I programmed two boards to talk to communicate with each other over Wifi.
Molding & Casting
Assignment Twelve
This week I molded and casted a top for the side table I built in CNC week.
Input Devices
Assignment Eleven
This week I tested a laser time of flight (ToF) distance sensor.
Machine Design
Assignment Ten
This week we worked in a group to create a pottery wheel combining design skills learned across course weeks.
Output Devices
Assignment Nine
This week I programmed my dev board to blink a haptic motor.
Electronics Design
Assignment Eight
This week I designed my own development board.
Computer Controlled Machining
Assignment Seven
This week we learned to mill with CNC machines. I designed and milled a cylindrical stool. I created a pattern in plywood allowing it to bend and form sides of cylinder.
Embedded Programming
Assignment Six
This week we learned how computers are made and programmed. I programmed two microcontrollers, Quentorres and Barduino.
3D Printing & Scanning
Assignment Five
Created a Voronoi sphere with internal "rattle" using a 3D SLA resin printer. 3D scanned some hands. Tried out the 3D printers at the Fab Lab in Barcelona.
Electronics Production
Assignment Four
Created a printed circuit board (PCB) with a milling machine. Stuffed and soldered the board with LEDs, resistors, etc. Programmed board.
Computer Controlled Cutting
Assignment Three
Created a latern with interchangeable panels. Made with paremetric design in Rhino 8 with Grasshopper.
CAD IN 2D & 3D, FILE COMPRESSION
Assignment Two
Learning to 3D model using CAD - I played around with several software options, but ultimately modeled a first mockup of my final project with Rhino 8. Also made and compressed some videos :)
Project Management
Assignment One
Relearning to use terminals, command prompts, and HTML. Starting to map out novel human-computer interfaces.
