Assignment Eleven
Molding & Casting
This week I molded and casted a top for the side table I built in CNC week.
Assignment Eleven
Input Devices
This week I tested a laser time of flight (ToF) distance sensor.
Assignment Ten
Machine Design
To be updated.
Assignment Nine
Output Devices
To be updated.
Assignment Eight
Electronics Design
This week I designed my own development board.
Assignment Seven
Computer Controlled Machining
This week we learned to mill with CNC machines. I designed and milled a cylindrical stool. I created a pattern in plywood allowing it to bend and form sides of cylinder.
Assignment Six
Embedded Programming
This week we learned how computers are made and programmed. I programmed two microcontrollers, Quentorres and Barduino.
Assignment Five
3D Printing & Scanning
Created a Voronoi sphere with internal "rattle" using a 3D SLA resin printer. 3D scanned some hands. Tried out the 3D printers at the Fab Lab in Barcelona.
Assignment Four
Electronics Production
Created a printed circuit board (PCB) with a milling machine. Stuffed and soldered the board with LEDs, resistors, etc. Programmed board.
Assignment Three
Computer Controlled Cutting
Created a latern with interchangeable panels. Made with paremetric design in Rhino 8 with Grasshopper.
Assignment Two
CAD IN 2D & 3D, FILE COMPRESSION
Learning to 3D model using CAD - I played around with several software options, but ultimately modeled a first mockup of my final project with Rhino 8. Also made and compressed some videos :)
Assignment One
Setup git, build this site, and plan final project
Relearning to use terminals, command prompts, and HTML. Starting to map out novel human-computer interfaces.
