This assignment consists of developing a KMR-V1 dissemination plan. Which will make a video of 1min duration and a panel that will be in pdf format which you can see at the end of this page.
>Develop a plan for dissemination of my final project.
The project objective includes:
-Learning outcomes:
Since this project, other projects will be performed to allow different teachers to the use of modules for different classes. In the beginning, I thought about science, but being creative anybody can create any project as needed according to the curricula based program.
-My project has been fully developed with an open source model based on an existing one. According to this link MIT OPEN SOURCE LICENSES.
-In this site I leave the files of my project where it can be shared, It will be distributed in these categories Laser Cut - Electronic - Moldeding. To modified and used in future projects, all the files will be available in the same online repository ( Google Drive ) the link will be on my page final project.
-I allow other creators to use the files, code and other resources that I use in this project. The only condition is that you post the copyright notice if any or all of the files in this project are used. As established by this license. I will use the Creative Commons license (CC) because it allows the free distribution of a work giving others the right to share, use and build on a work that he / she has created.
-I use these creative commons licenses by attribution because it allows all users of the original work, as long as it is attributed to the original author. I chose to work with a Creative Commons License Recognition 4.0 International.
Thank you and May the force be with you.
===== Summary Slide =====
Dissemination of my final project
This week I worked how i can decide to do a presentation project 1920x1080 in pdf (png image).
Picture 90.0. This are my first idea of my diagram of my idea for my summary slide. Picture 90.0.1. This are a diagram of my idea for my summary slide.
Picture 90.1. This are my final summary slide. Slide.pdf
======== Video Reel ========
KMR-V1 Electronic Drum Kit video reel
This are my video in 1080p. When I show all the steps of the fabrication of the Electronic Drum Kit.
Picture 90.0. I draw a storyboard of my video reel.
Video.01 This are my Video Reel final.
========== learned/conclusions ==========
When I began to imagine and visualize my project and even more to imagine how to promote it at the time, I had no ideas, but when I was already having a fixed course, the ideas were already clearer. I am more of taking a pencil or pencil and drawing and scribbling, so I took my block and drew an outline of what it would look like and I wanted my summary slide to be I made two ideas, I prefer to have them as a starting point than to have nothing and the same I did with my story board. Here it does not matter much if you are a film director or not, what matters is that what you present has a sequential order and obviously make it attractive, how do we achieve this by taking good photos and obtaining good video shots, which give more attraction when watching your video. Now I have a problem, it seems to me that 1 minute is too little, but it is a challenge for me to be able to explain everything in 1 minute.
