20. Project development¶
This week’s assignment was to complete your final project and track your progress.
What tasks have been completed, and what tasks remain?¶
Completed¶
- Wavy frame Boarder
- Two-way Mirror
- Cut out pieces for box
- Monitor
- Downloaded Magic Mirror API
- Doppler radar to turn the pi display on and off
Remaining Tasks¶
- Putting together box
- Holding Monitor in place, using clamps
- Electronics (mostly done)
- Box to hole electronics( Wire management)
What’s working? what’s not?¶
- Holding the monitor in place has posed a challenge 6/7/22—> Figured out the idea and how to
6/8/22 —> Do it and assemble.
What questions need to be resolved?¶
Will I need a power supply since I will be using more than 4 Neopixels while using AtTiny 412?
What will happen when?¶
5/31/22 —> CNC Design and cut out wavy mirror frame
6/1/22 —> Start downloading Magic Mirror API using Raspberry Pi
6/2/22 —> Plan out how the electronics will be handled and start working on Humidity Sensor
6/3/22 –> Work on previous day’s electronics
6/4/22 –> Present on Global Time and Get feedback. DOCUMENT!! Go to Lab and work on Mirror and Acrylic
6/5/22 —> Work on Electronics, Doppler Radar
6/6/22 —> Work on frame, box, and mounting monitor
6/7/22 —> Putting together the box and fixing the monitor with clamps, as well as screwing the two-way mirror.
6/8/22 —> Paint the Frame, Wire management, and NAIL DOWN on electronics
8/9/22 —> Electornics
9/10/22 —> Electronics shouls be finished
9/11/22 —> Focus on 3D Printing and laser cutting for raspberry pi case
9/12/22 —> Wire management and start video
9/13/22 —> DOCUMENTTTTTTT and video
9/14/22 —> Video ad Slide
9/15/22 —> Look nice final touches on the project, and Airtime!
What have you learned?¶
I have learned that time management and organization are SOOOO important. Without it, you can be completely lost.
I have also learned that some things may seem easy, but they are not… for example the two-way mirror on try 1 or fixating the monitor.
Less is better.