Week 18: Integration.

A.k.a. the final stretch: finishing Sandy 🎭✨


🪛 Overview

This week was about completing the final project and tracking progress along the way.

My final project is Sandy: The Performer, a string puppet moved by 7 servos and controlled from a phone over Wi-Fi. I presented it on 10 June 2026 🎤 Full documentation is on my Final Project page.

🎬 Final Presentation

Presentation slide for Sandy: The Performer
My presentation slide: every process that went into Sandy

📅 Progress Tracker: 20 May → 10 June

Three weeks from "puppet on strings" to "puppet on stage". Dates without a ~ match the dates on my project files. ~ means approximate.

🔹 Before the tracker

  • • 6 May: final project idea documented on my site
  • • 8 May: first servo tests
  • • 13 May: two servos running from the ESP32

🔹 Week 1 · 20–26 May: Prototype the motion

DateTask
~20 MayDropped the sound-reactive version (it felt random) and switched to voice + button control so Sandy can perform
21 May3D printed the articulated puppet model from GrabCAD
~22–25 MayHand-puppeteered with strings on two dowel sticks to find the movement range and number of strings
26 MaySingle-servo test on the XIAO ESP32-S3, then swapped my hands for servos. It worked!

🔹 Week 2 · 27 May – 2 June: Electronics + code

DateTask
~27–28 MayMapped all 7 servos on cardboard: head, 2 elbows, 2 wrists, 2 knees
~29–30 MayWired the PCA9685 driver over I²C and set the limp / neutral / pulled angles
~31 May – 2 JuneFirmware: Wi-Fi access point, WebSocket server, command parser, smooth motion, poses
~2 JuneBrowser interface with voice input + quick command buttons

🔹 Week 3 · 3–9 June: Fabrication + PCB

DateTask
~3–6 JuneModelled the theatre in SolidWorks with slot joints, then laser cut it
~6–7 JuneSanding + finishing the puppet
8 JuneDesigned + 3D printed the SG90 pulleys that wind the strings
9 JuneDesigned the XIAO PCB in EasyEDA, exported Gerbers, milled it
~9 JunePCB #1 came out mirrored 🪞 and PCB #2 lost a trace. Also debugged Wi-Fi for hours (the antenna wasn't plugged in) (ಥ﹏ಥ)

🔹 Presentation day · 10 June

DateTask
10 June (2 am 🌙)Final schematic saved
10 JuneFinal assembly: puppet strung up in the theatre, fairy lights on
10 JunePresentation slide + video made and uploaded
10 JuneFinal presentation 🎤

✅ Completing the Final Project

🔹 What's done

  • • Puppet with 7 string-driven joints, controlled by voice + buttons over Wi-Fi
  • • Smooth servo motion using the limp / neutral / pulled system
  • • Poses: stand, limp, wave, bow, dance, hands up
  • • Custom XIAO ESP32-S3 PCB, laser-cut theatre, 3D-printed puppet + pulleys
  • • Documentation, design files, presentation slide + video

🔹 What's still on the list

  • • Hide the electronics inside the stage
  • • Make string tension easier to re-tune (right now it drifts)
  • • The autonomous "possessed" mode from my original idea 👀
  • • The puppeteer hand that moves out of sync with the puppet

✨ What I Learned

  • • Tracking progress week by week made it obvious when something was slipping
  • • Leave buffer time before the deadline, because PCBs will come out mirrored 🪞
  • • Documenting as I go is so much easier than reconstructing it all later