One thing all humans have in common is that each of us wants to be happy. However, sometimes we need a stoplight and figure out what makes us happy. The happiness lamp will help you slow down and step back in this fast paced life. It helps you notice your personal needs, and above all read more...
The happiness lamp is still in a testing stage for the concept developers at Waag Society. We want to see how it can influence peoples happiness. On the website of Waag (Institute for art, read more...
For the Fablab in Amsterdam we wanted to create a solution for the lack of documentation done by the people who visit on the open-days. Often the quality and explanation of their project wasn't fulfilling our need to share knowledge with everyone visiting the Fablab and the website. This is read more...
One thing all humans have in common is that each of us wants to be happy. However, sometimes we need a stoplight and figure out what makes us happy. The happiness lamp will help you slow down and step back in this fast paced life. It helps you notice your personal needs, and above all, it is read more...
For this assignment I want to start working on an interface with sliders. I want to connect the sliders to the SoftPWM in my code. This so I could theoretically create 16581375 colours with the use of a RGB led. I want read more...
I created a 3D Model of how the mechanics (friction principle) should go togetherread more...
For my final project I would like to make the lamp standalone for this a colleague of my told me that I could try the nRF24L01(+) 2.4GHz Wireless Transceiver. Through this communication I want to give a colour input to read more...
For this assignment I created something that could be for use for my final project. I programmed my FabtinyStar with an edited version of the DigiBlink code. This is a code so you can give an input to an RGB led read more...
Since a couple of week I am the owner of a old racebike and I wanted to create something for this bike. So I started by making a bike seat from polyester and machinable foam. I designed the model in rhino based on read more...
After a brainstorm session with two concept developers of the Waag we decided to start testing three different functions of the happiness lamp. The three functions are a Beat lamp, Friend lamp and magnet lamp read more...
I decided to try out the step response input device for this assignment this because of the endless possibilities of this input device. I started with designing a circuit board with a ATTINY44 so I would have more analog inputs than the ATTINY45 read more...
For this assignment I designed a abstract version of the Kartell Bourgie lamp. But during the process of making it as a mild I had quite some troubles. The main trouble was that the model was that I didn’t leave enough space at the insides between the model read more...
I have been working during this assignment on my final project, my finale project makes use of programming and electronics. I programmed the Fabtinystar I made with the use of the Arduino IDE. I added a potentiometer that can give an analog input to one read more...
Since the start of the idea of the happiness lamp I spend quite some time brainstorming and thinking about what the lamp should be. After testing and talking to other people I decided that the happiness lamp should be something personal. The user should be glad to have it as an object read more...
With my fellow student Emma Pareschi I am working on a foldable photo studio for Fablabs. The concept is to create the studio with the use of one plank of wood (122mm x 244mm x 12mm). The concept started as a thought I had about people documenting their work. This is an important read more...
For this assignment I started with some tutorials on how to use the Eagle software. This tutorials can be found in the list at the bottom of the page. I also used the help of our electronics guru Zaerc to explain me a few things. I created the helloBoard with an extra RGB led and TACT switch. read more...
For the 3D assignment I used the model I designed in Rhinoceros for the CAD assignment. This shape is a prototype of how my final lamp could look. The interesting part about printing this object was the overhang of the different shapes. For the 3D scan assignment I scanned and printed a read more...
For the assignment Electronics Production I created a FabTinyStar that is a fab-able version of the vusbtiny programmer from simpleavr with a few minor additions, namely a switch and indicator-led for target-power and a led on the SCK line.read more...
When thinking about constructions I thought about molecules. This is why I created a easy to use tool for teachers to explain the periodic table of the elements. Kids can build their own molecules. read more...
For my final project I created three models with the use Rhino and Cinema4D. I do feel it takes some more time & work to create the definite model. The models of the lamps are inspired by the Buddhist culture. The lamp will help a person meditate in times of stress. read more...
Visualising data is one of my interests especially when it involves visualisations of society or a human being. So, this is something I want to do for my final project. For my final presentations I have three different ideas, in the end I will pick one of them. read more...