Site Last Updated on December 3, 2020
This is SAEED
Maker of Things
Content Developer
Fab Lab Egypt Team
A mechatronics engineer who loves creating and tinkering around with electronics, robots, machines, and art. Currently manages the development of the educational content at San3a Tech (Fab Lab Egypt).
Former Robotics Engineer. Former University Teaching Assistant.
I like Cats, Graphice Design,
Music,
and Cartoon Shows.
-
Became an Intern at Fab Lab Egypt
Aug. 2014 to Present 
Founded and Managed a community-run mini Fab Lab in my home city
Jan. 2016 to Dec. 2017 
Visited MIT and Harvard ヾ(⌐■_■)ノ
Sept. 2016 - Visited many Fab Labs, Makerspaces, and Universities across the US; as part of an exchange program
Worked with KUKA robots
Sept. 2016 to Aug. 2017- Wrote some Python drivers to control the robot over Ethernet
- Integrated the robot in a visual servoing system; using ROS and a Kinect
- Made an Inkscape extension to convert 2D SVG into drawable shapes using KUKA KRL
- Developed a low-cost 3D Printed Gripper for the robot
Assisted in Teaching Mechatronics Engineering at a University
Sept. 2017 to Aug. 2019
Started Developing Contents, full-time, at San3a Tech (Fab Lab Egypt)
Aug. 2019 to Present- Became interested in Instructional Design and Educational Kits Development
- Develops technical content for the lab programs
- Developed a kit used in a workshop about saving energy at home
- Developed a content and a kit for a +5 robotics workshop in Abu Dhabi Science Festival
This website was created in the time of a pandemic.
You may check if I'm still doing well : D
