Itan Fuentes Santamaria
Email: itan.fs@hotmail.com
Phone: 2227535416
Eagle is a specialized software to design electronic board, it offer the option of add the component that will be used in the design, like resistor, capacitors, microcontrollers, leds and more, and make the union of every component. This Board con be printed and use it to make the design real. Eagle is an easy program to use for beginners or advanced users.
i left some pics of the software
These image is the from the eagle board design. here it shows the components conected in the way we need it in order to made the circuit functional
This image shows the circuit we need to print in order to produce the circuit on a copper board. it can be produced in many way, for example, using and Router CNC o UV process.
For the milling proces on a MODELA machine....
we give to the program the board archive from AEGLE in a .png because in this format the machine software can use it like a follow line program.
here are some pics
i have to mention that i normaly use a Laptop with Windows System, but in order to use the fablab modules i need to use LINUX, so i decide to use a virtual machine to be able to use LINUX, but when i try to use the virtual machine, i realize that the machine gets sloppy, so i had to install Linux as main operative system. the issue get solved and i could use the fab module for the Modela machine
this is how the copper board end and it's ready to weld it the components. i have to say i had to adjust many time the parameters to set the tool in the correct position to carve it well
to weld the component it can be a bit complicated for the beginners especially if we are going to work superficial components insted of through hole components. This because of the really tiny size of them. sometime you need practice and some tips to do it well and not to mention that you need a well and fine soldering tip to make it more easy. Find the Documents HERE
