Computer - aided design
What I wanted to experience first is to draw it in Autocad 2013, so I found interesting to import the images and then draw on them; I used this drawing to work on the 3D model.
Import the image of the table and started to draw
Perform each of the drawings with the belt geometry
This is another alternative that could be made with another mat of
Chiapas.
This is another alternative you make with other mat Chiapas
Download file Telas Mayas 2D.dxf
This is the image were any of the rugs are selected. I start working, the conduct in Inkscape, single image is automatically vectorizo.I started to prepare the Section of the drawing and the dimensions to be send to the vinyl cutter.
This image is going to be vectors in Corel Draw
So it can be cut in the vinyl plotter.
It was so ready to pass the plotter.
This is the image that will be cut and the file is already on the cutting plotter Software
When the material is placed on the plotter, it is ready to start cutting
This is our final design
Final work
![](http://www.fablab.mx/gonzalo/tarea02/16.jpg)
![](http://www.fablab.mx/gonzalo/tarea02/17.jpg)
Working in 3D
I started to
do the work in the Rhino program, this program has the advantage
of working in different views and it is easier for you are
reviewing all planes
This is the
third dimension of a mat which has different volumes, at the time
you make the dimensions of the machine you want to work the
difficulties begin.
In the final project I want to apply some of these geometries
![](http://www.fablab.mx/gonzalo/tarea02/18.jpg)
Download
file Telas Mayas 3D.3dm
(Archivo Rhino 5)
Download
file Telas Mayas 3D.dxf
Final work