FABDUINO

First I dawnloded the FABDUINO files (traces,interior)and used the Tutorial by anna.
I milld the board

and sodered the components to it.

After I made the Fabduino I dictated to make the Barduino

BARDUINO

I dawnloded the Barduino files (traces,interior)and used the Tutorial by luciano.

You can download the schematics and board files.

The components you will need are :

Inventory components

• Resistor 1K
• Resistor 0
• Capacitor 10uf
• Capacitor .1uf
• Red LED
• Green LED
• Shottky Diode
  
• 5V Regulator
• Power Jack
• ICSP Connector
• Button
• FTDI Header
• ATMega 328

Non-Inventory components

• Crystal 16 Mhz
• Capacitor 18pF
• 6 POS Header

After milling the board I soldered it .

This is a pinout of the final board which displays the pin numbers .