This page is the experience I make last several years.

Part1:Assembly 3D printing

In 2014 I assemble my first FDM 3D printing mbot made in China

Figure1: Components

Figure2: Assemble the structure

Figure3:Test the machine

Part2.test machine

[Figure4:Test the platform level](http://a360.co/2BGUFrW) In this model the slice software parameter we choice can be(Infill density:100%,Generate support:NO;Building adhesion type:NO;Other parameter can be determine by ourselves ) ![](https://ws2.sinaimg.cn/large/006tNc79gy1fovbi58zqvj310u0q0n0g.jpg) ![](https://ws1.sinaimg.cn/large/006tNc79gy1fosh1jwlj1j313g0m4q62.jpg)
[Figure5:ctrlv-3d-test model used to test the Comprehensive performance of 3D printing ](http://a360.co/2Gz3ZNV)

The right picture of bottom show that the min top of cone should be bigger 0.8mm because of the nozzle size


10. post processing

practice material

case

potential problem and solution

results matching ""

    No results matching ""