Casting material

Product/Chemical Name: MOLD MAX 60 PART A:

• identification of risks Non-hazardous according to the US Occupational Safety and Health Administration (OSHA).

• Inhalation

Remove source(s) of contamination and move victim to fresh air.

• eye contact

Flush eyes with plenty of water. If irritation persists, seek medical attention.

• Skin contact

In case of skin contact, wash thoroughly with soap and water; remove contaminated clothing and wash before reuse.

• Ingestion

Do not induce vomiting unless advised by a physician. Contact the doctor immediately.

• After first aid, obtain appropriate medical support in the factory, paramedic or community.

• Flash point 300 °F

• Handling Precautions Minimize breathing of vapors and avoid prolonged or repeated contact with skin. Wear appropriate protective equipment. Use good general housekeeping procedures.

• Storage Requirements Store in a cool, dry, well-ventilated place.

• Protective clothing/equipment Wear chemical protective gloves to avoid prolonged or repeated skin contact. Wear protective eyewear or chemical safety goggles in accordance with OSHA eye and face protection regulations 29 CFR 1910.133 and European Standard EN166. Contact lenses are not eye protection devices. Appropriate eye protection should be worn instead of or in conjunction with contact lenses.

• Toxicological information :

• Eye Effects: Irritation

• Skin Effects: Irritation

• Carcinogenicity: None determined

• Mutagenicity: None determined

• Teratogenicity: None determined

Product/Chemical Name: Mold Max 60 Part B:

• identification of risks

• Harmful if swallowed.

• Irritating to eyes, respiratory system and skin.

• Harmful to aquatic organisms may cause long-term adverse effects in the aquatic environment.

• Inhalation - Remove source(s) of contamination and move victim to fresh air. If breathing has stopped, give artificial respiration, then oxygen if needed. Contact the doctor immediately.

• Eye contact - Flush eyes with plenty of water. If irritation persists, seek medical attention.

• Skin Contact - In case of skin contact, wash thoroughly with soap and water; remove contaminated clothing and wash it before reuse; seek medical attention if a rash develops.

• Ingestion - Do not induce vomiting unless advised by a physician. Contact the doctor immediately.

• After first aid, get appropriate factory, paramedic, or community medical support.

• Flash point - 150 Â °F

• Handling Precautions - Minimize breathing of vapors and avoid prolonged or repeated contact with skin. Wear appropriate protective equipment. If ventilation is not sufficient, wear suitable respiratory equipment. Reseal partial containers. Use good general housekeeping procedures.

• Storage Requirements - Store in a cool, well-ventilated place

• Protective Clothing/Equipment - Wear chemical resistant gloves and aprons to prevent prolonged or repeated skin contact. Wear protective eyewear or chemical safety goggles in accordance with OSHA eye and face protection regulations 29 CFR 1910.133 and European Standard EN166. Contact lenses are not eye protection devices. Appropriate eye protection should be worn instead of or in conjunction with contact lenses.

• Toxicological information:

• Eye Effects: Irritation

• Skin Effects: Irritation

• Carcinogenicity: None determined

• Mutagenicity: None determined

• Teratogenicity: None determined

Smooth-Cast 305 Series Safety Data Sheet Review:

Product/Chemical Name: Smooth-Cast 305 Part A

• identification of risks

• Harmful by inhalation.

• Irritating to eyes, respiratory system and skin.

• Limited evidence of a carcinogenic effect

• Harmful; danger of serious damage to health by prolonged exposure through inhalation.

• Inhalation - Remove source(s) of contamination and move victim to fresh air. If breathing has stopped, give artificial respiration, then oxygen if needed. Contact the doctor immediately.

•Eye contact - Flush eyes with plenty of water. If irritation persists, seek medical attention.

• Skin Contact - In case of skin contact, wash thoroughly with soap and water; remove contaminated clothing and wash it before reuse; seek medical attention if a rash develops.

• Ingestion - Do not induce vomiting unless advised by a physician. Contact the doctor immediately.

• After first aid, obtain appropriate factory, paramedic, or community medical support.

• Flash point - 262 Â °F

•Handling Precautions - Minimize breathing of vapors and avoid prolonged or repeated contact with skin. Wear appropriate protective equipment. If ventilation is not sufficient, wear suitable respiratory equipment. Reseal partial containers. Use good general housekeeping procedures.

• Storage Requirements - Store in a cool, well-ventilated place

• Protective Clothing/Equipment - Wear chemical resistant gloves to prevent prolonged or repeated skin contact. Wear protective eyewear or chemical safety goggles in accordance with OSHA eye and face protection regulations 29 CFR 1910.133 and European Standard EN166. Contact lenses are not eye protection devices. Appropriate eye protection should be worn instead of or in conjunction with contact lenses.

• Toxicological information:

• Hazardous component: 4,4 - ™ Methylene, bis (phenylisocyanate)

Product/Chemical Name: Smooth-Cast 305 Part B:

• Hazards Identification - Non-hazardous by US Occupational Safety and Health Administration (OSHA).

• Inhalation - Remove source(s) of contamination and move victim to fresh air.

• Eye contact - Flush eyes with plenty of water. If irritation persists, seek medical attention.

• Skin Contact - In case of skin contact, wash thoroughly with soap and water; remove contaminated clothing and wash before reuse.

• Ingestion - Do not induce vomiting unless advised by a physician. Contact the doctor immediately.

• After first aid, obtain appropriate factory, paramedic, or community medical support.

• Flash point - 262 Â °F

• Handling Precautions - Minimize breathing of vapors and avoid prolonged or repeated contact with skin. Wear appropriate protective equipment. Use good general housekeeping procedures.

• Storage Requirements - Store in a cool, well-ventilated place

• Protective Clothing/Equipment - Wear chemical resistant gloves to prevent prolonged or repeated skin contact. Wear protective eyewear or chemical safety goggles in accordance with OSHA eye and face protection regulations 29 CFR 1910.133 and European Standard EN166. Contact lenses are not eye protection devices. Appropriate eye protection should be worn instead of or in conjunction with contact lenses.

• Toxicological information:

• Acute Inhalation Effects: None established

• Acute mouth effects: None established

• Reproductive Toxicity: None established

• Mutagenicity: None established

• Teratogenicity: None established

• Awareness: None established