Huber Girón Nieto
Electronic and Mechatronic Engineer
Contact
e-mail: huber.giron.nieto@iberopuebla.mx
phone: +52 (222) 372 3000 ext.12917
FABLAB Puebla Researcher
WEEK ASSIGNMENT:
Applications and Implications
Propose a final project that integrates the range of units covered
This project consists of an interactive table of 1 x 1m that displays 3D data.
The table will be covered with lycra, with a sublimation printing or white.
- Below the table we are going to install 25 actuators that raise the surface depending on the data. Example: Increased wealth rather high.
- Above the table a projector which will be responsible for project data.
What will it do?
This project consists of an interactive table of 1 x 1m that displays 3D data.
The table will be covered with lycra, with a sublimation printing or white.
- Below the table we are going to install 25 actuators that raise the surface depending on the data. Example: Increased wealth rather high.
- Above the table a projector which will be responsible for project data.
Who's done what beforehand?
After an investigation on Internet,I couldn't find a project with the same concept
What materials and components will be required?
Structure: MD F sheet
Actuators: Servomotors, and casting pieces
Control System: Atmega board
Image Projection: Projector
Where will they come from?
From Mexico stores, and even recycle material.
How much will it cost?
It will cost 500$ US D
What parts and systems will be made?
Structure, Actuators, Control System and Image Projection System
What processes will be used?
Structure: Laser cutting
Actuators: Molding and Casting, thermoforming
Control System: PCB Engraving, embedded programming and communications
Image Projection: Software design
what tasks need to be completed?
Design, make, probe:
- Structure
- Actuators
- Control System
- Image Projection
What questions need to be answered?
Can i communicate software with atmega shield?
What are the actuators resolution?
A 3D data table is best than a 2D data graph?
What is the schedule?
3 weeks to make everything.
How will it be evaluated?
If every system can interact with the other systems, and the image projection is synchronize with the movement of the actuators, Its OK.