CRAFTSMAN BANDSAW

QUICK REFERENCE OPERATOR CARD

1. Pre-Start Checklist & Calibration

  • Blade Tracking: Turn tracking knob so blade runs centered on upper wheel rubber tire.
  • Blade Tension: Set quick-tension knob to match active blade width.
  • Guide Clearance: Set upper blade guide assembly within 1/4” of top of workpiece.

2. Safety Precautions

  • Guarding: Keep all wheel covers closed and blade guards in place.
  • Hand Clearance: Keep hands clear of direct blade path; use push sticks on narrow stock.
  • Jam Handling: If stock jams, turn off machine and wait for blade to stop before clearing.

3. Basic Operating Procedure

  1. Adjust upper guide height to match workpiece thickness.
  2. Turn on bandsaw power and allow blade to reach full speed.
  3. Feed wood smoothly into blade along marked lines without twisting blade.
  4. Release blade tension at end of workday.