CRAFTSMAN BANDSAW

Machine Orientation: Craftsman Bandsaw

Conceive

The main concept involves curved cutting, resawing, and non-linear timber profiling using a continuous flexible steel band blade running vertically across rubber-tired wheels.

Context

Functions as a dedicated station for curved cuts, timber resawing, and contoured wood shaping.

Comprehend

Continuous downward blade movement pulls stock downward against the table, eliminating kickback hazards while cutting curved or thick wood profiles with a narrow kerf.

take Care

  • Guide Height: Adjust upper guide assembly so it sits within 1/4 inch of top of workpiece.
  • Blade Guarding: Keep all guards in place and keep hands clear of direct blade path; use push blocks when required.
  • Jam Clearance: Turn off machine and wait for blade to stop completely before removing jammed pieces.

Calibrate

  • Blade Tracking: Turn tracking knob so blade runs centered on upper wheel rubber tire.
  • Blade Tension: Set tension knob to match installed blade width.
  • Guide Bearings: Adjust upper and lower side guide blocks and thrust bearings close to blade without binding.

Control

  1. Adjust upper blade guide to workpiece thickness.
  2. Check blade tracking and tension.
  3. Turn on bandsaw and allow full speed.
  4. Feed stock smoothly into blade following marked layout curves without twisting blade.

Create

Produce curved furniture legs, intricate relief shapes, resawn boards, and timber joinery cuts.