Wildcard Week

Learning outcomes

Demonstrate workflows used in the chosen process.

Select and apply suitable materials and processes to create your project.

Have you!

Shown how you made your project

Described problems and how you fixed them

Included your design files and ‘hero shot’ photos of the project

We are assigned to make something from textiles. Since I do not have any Experience. I will try to make a Baby bib.

Assignment Requirments/h2>

Laptop

Janome Memory Craft 15000(Sewing Machine)

Hand tools (scissor, cutton thread)

Procedure

Open Corel Draw Software. Design image or a word or sentence or something in your mind. Export the file as DST format which is acceptable by Digitizer V5 (To setup the design for the sewing machine).

Open Digitizer V5. Click new then Insert artwork and choose the design has done

Here you can manage your design like sketch type, cross density(High cross density = more cutton thread and more time). Here some sketch types

You can manage your art pieces specification such as colors, sketch type and cross density. in addition the Machine will do each art piece seperately and you can skip unwanted parts in the design

Since my art design size less than 140mm * 140mm I chose Hoop SQ14. The Hoop is usedto to stetch the textile for sewing in the machine. it has a link for the x and y controller to move as per the design.

You can manage your art pieces specification such as colors, sketch type and cross density. in addition the Machine will do each art piece seperately and you can skip unwanted parts in the design

Whoooa we can move to Send the design >> save file to USB Drive>> move to Janome Memory Craft 15000

Janome Memory Craft 15000 Setup. Cutton thread must have enough capacity. I'm lucky because Janome Memory Craft 15000 is smart and paused my work due to insufficent of thread. here the thread refill tool

Finally job Resumed and here the final product

Files

Design

Softwares

CorelDraw

Digitizer V5