| WEEK | TASK | DESCRIPTION | % | NOTES |
|---|---|---|---|---|
| 1 | PROPOSAL | 100% | ||
| 2 | RESEARCH | 0% | ||
| 3 | RESEARCH | 25% | ||
| 4 | RESEARCH | 25% | Electronics Production | |
| 5 | RESEARCH | 25% | 3D scanning and printing | |
| 6 | RESEARCH | 50% | ||
| 7 | RESEARCH | 50% | ||
| 8 | RESEARCH | 75% | Embedded Programming | |
| 9 | RESEARCH | 75% | ||
| 10 | RESEARCH | 100% | —– BREAK —– | |
| 11 | ELECTRONICS | Design board | 50% | Input Devices |
| 12 | ELECTRONICS | Mill / Solder / Test | 100% | Moulding & Casting |
| 13 | CAD | Design / 3D Print | 25% | Output Devices |
| 14 | CAD | Design / 3D Print | 50% | Networking and communications |
| 15 | CAD | Design / 3D Print | 75% | |
| 16 | CAD | Design / 3D Print | 100% | |
| 17 | CASTING | Cast 1st half mould | 50% | |
| 18 | CASTING | Cast 2nd half mould / Final casting | 100% | |
| 19 | EMBEDDED PROGRAMMING | Mild PANIC! | 50% | PROJECT DEVELOPMENT |
| 20 | EMBEDDED PROGRAMMING | not so mild PANIC! | 100% | PROJECT PRESENTATION |