#

Lesson 4

    What Neil was talking about:
  • Homework
  • PDB setup in milling machine
  • The edges of the miller
  • Something about copper (I didn't hear it well)
  • How to solder
  • Pay attention to the direction of the diods and the main processing unit
  • How to solder better than the regular way
  • Wash the PCB board after soldering
  • De-soldering
  • The assignment

    Homework:
  • I have made a FabISP few days ago.
  • Some Screenshots of the FabModules and milling process (the computer part):
  • Milling in Ohad's Sher-Line machine (computer only):
  • G-Code of the FabISP:
  • Selecting the PNG to DXF in FabModules:
  • PNG to DXF (FabISP board) in FabModules:
  • Selecting the PNG and RML formats in FabModules:
  • Selecting the PNG to G-Code (.g) in FabModules:
  • The FabISP board scheme in FabModules (PNG to G-Code):
  • Need to click that for making the path that the milling machine needs to follow:
  • The board itself:
  • Programming the board using the Atmel AVRISPmkII:
  • [COMMAND] make hex - for making the .HEX install file
  • [COMMAND] make fuse - for burning the program
  • [COMMAND] make program - for programming the FabISP.
  • If everything went well, then you need to unsolder the solder bridge

    And then connect it to your computer



#