Week 11


Home About Me Final Project

Week 1 - Project mangement
Week 1.5 - Principles and Practices
Week 2 - Computer-Aided Design
Week 3 - Computer-Controled Cutting
Week 4 - Electronics Production
Week 5 - 3D Scanning and Printing
Week 6 - Elecronics Design
Week 7 - Computer-Controled Machining
Week 8 - Embedded Programming
Week 9 - Mechanical Design, Machine Design
Week 10 - Input Devices
Week 11 - Modlung and Casting
Week 12 - Output Devices
Week 13 - Networking and Communications
Week 14 - Interface and Application Programming
Week 15 - wildcard Week
Week 16 - Applications and Implications
Week 17 - Invention, Intellectual Property, and Income
Week 18
Week 19
Week 20

Molding and Casting

The group asinment is to read all the safty sheet of the molding meteral in our labs and then compair the resalts. The Solo asinements was to design a mold and then us our mill to mill it out and make a mold from it. Then using that mold to make a casting.

Group Asinement

Solo Asinement

for the solo Asinement I used fustion 360 to design the objet and the to generate the tool paths. the desine that i made was a weird face thing. I made two tool pats in fustion the first was asaptive clearing here was the resalt.

after adative clearing I use the tool path of __________ for the fine cut here is the resalut.

after this I relised that a chanel that I needed didnt get cut out to cut it out I used a 2-d poket cut and then I got this.

using the mechenible wax as a mold I made this mold. the first image is of it seting, the second is a compairison of the mold to the wax.

I then used the mold to make a cast here is a image of the first cast from the mold next two the mold.

I then used the mold to make anthor cast here are the two cast side by side.

here is a link to my work its in the week 11 folder.here is the link