Goal

measure something: add a sensor to a microcontroller board that you’ve designed and read it

Video

Challenges

this is text

Related Classes

In this week’s class we reviewed the various sensor components that we can add to boards. Review the different sensors and pick one that you feel most comfortable working with.
http://academy.cba.mit.edu/classes/input_devices/index.html

Pick one of the board designs and redraw it. Good review material is covered in the March 4 lecture for design.
http://academy.cba.mit.edu/classes/electronics_design/index.html

Once designed, you will need to review the Feb 18 lecture to mill out the board on the MDX-20. I was able to get this done in fabmodules.org. Need to update my page, but I’ll have some blog entries covering communicating with the unit at SETC.
http://academy.cba.mit.edu/classes/electronics_production/index.html

The March 11 lecture addresses programming the boards, you can find that material here:
http://academy.cba.mit.edu/classes/embedded_programming/index.html

Read through the datasheet for the ATtiny45. That was also covered in the March 11 lecture.
http://academy.cba.mit.edu/classes/input_devices/doc2586.pdf

Class Notes

this is text

Review Materials

this is text

Assignment

this is text