Goal | Class Archive | Video | Challenges | Related Classes | Class Notes | Review Materials | Assignment
Goal
make the FabISP in-circuit programmer
David Andy Valentin
hello.ISP.44.cad board components traces interior
hello.ISP.44.res.cad board traces interior
inventory microcontroller crystal USB connector ribbon connector Zener diode jumper
firmware.zip
USB power
make clean
make hex
(sudo) make fuse (check programmer in Makefile, may need to repeat)
(sudo) make program
desolder SJ1 and SJ2
make IDC ISP cable, connecting header pin 1 to pin 1, check wires
Video
Challenges
this is text
Class Notes
this is text
Review Materials
this is text
Assignment
Electronics Production #1 (First mill job)
Electronics Production #2 (Getting Modela to Home)
Electronics Production #3 (Modela acts up, flashing modeling light)
Electronics Production #4 (Successful test run)
Electronics Production #5 (mill attempt)
