Fab academy 2020   

Assignment 06

3D Scanning & Printing.

"If knowledge is Power, then Imagination is a SUPERPOWER!"

About this assignment

Objective of this Assignment

Group Assignment:
To learn how to use PCB milling machine and make an ISP(Group) using it. To cut a design to check the mininum track width which can be obtained using the drill bit.
Individual Assignment:
To make an ISP(individual) using the PCB milling machine and program it.

Group Assignment

Here is the link to my Group Assignment

  • click here.

    • What did I learn from this Group Assignment?

    This was my first group Assignment & it taught me a lot of things such as Team Work, leadership skills, etc.
    I had great time working with my Team. We divided most of tasks and then worked on it collectively. By doing this it effectively used skills of each member and then outcome was very good. At first we calculated power & speed of the laser cutter required to cut cardboard properly. We did that by cutting various pieces of cardboard with different combinations of power & speed. After that we gave a star rating of 0 to 5 to each piece and then finalized the 5 star rating as it worked the best. Then we calculated then kerf of the laser by cutting various cuts of different dimensions (comb shaped cardboard). After testing, we finalized the cut which fit perfectly.

    Photo Gallery

    these are some photos of the ISP which we made during this assignment

    Personal Assignment

    This is what i did in my personal Assignment.

    This was my first group Assignment & it taught me a lot of things such as Team Work, leadership skills, etc.
    I had great time working with my Team. We divided most of tasks and then worked on it collectively. By doing this it effectively used skills of each member and then outcome was very good. At first we calculated power & speed of the laser cutter required to cut cardboard properly. We did that by cutting various pieces of cardboard with different combinations of power & speed. After that we gave a star rating of 0 to 5 to each piece and then finalized the 5 star rating as it worked the best. Then we calculated then kerf of the laser by cutting various cuts of different dimensions (comb shaped cardboard). After testing, we finalized the cut which fit perfectly.

    Photo Gallery

    these are some screenshots of designs which I made in softwares like Inkscape, MyPaint, GIMP, FreeCAD, SolidWorks.

    What did I learn from this Assignment?
    Things i learned from this assignment