Fab Academy 2012 Ohad Meyuhas

http://youtu.be/QsN4k3Zm4H8 The aim was to design a laser cutter as economically as possible (~4500 euros). During my research, which included studying other open source projects,  I became aware of a new kind of laser — a diode laser — which can move through optical fibers. This enabled me to have a free-standing multifunctional head while also making [...]

  http://youtu.be/QsN4k3Zm4H8 The Aim was to Design a laser Cutter, Economically as possible (~4500Eros), That can be multifunctional and with up to date technology Even to have 5 axis laser cutter Study from other Open sources Project and design a multifunctional machine Using a a small diode laser let me have more working space, less energy consumer and more precise [...]

Open source laser Machine, but in the same time it is a collaboration with laser company Study from the open source laser cutter I found the almost half of its price goes to the machine construction. Because of its use the construction need to be from strong and laser prof (as much as possible). Therefor the Machine [...]

Study from the open source laser cutter I found the almost half of its price goes to the machine construction. Because of its use the construction need to be from strong and laser prof (as much as possible). Therefor the Machine design was very importent I tried to optimize the parts and by that to lower the cost [...]