Work in progress

Open source laser Machine, but in the same time it is a collaboration with laser company

Study from the open source laser cutter I found the almost half of its price goes to the machine construction.

Because of its use the construction need to be from strong and laser prof (as much as possible).

Therefor the Machine design was very importent I tried to optimize the parts and by that to lower the cost of the machine, 7 different designs till I came to the last one.

actually  now when I know that I can use Scobond for the machine skin that the laser wont damage it I am working on new design to mill a Scobond sheet and build with it more parts of the machine

- The machine Electricity will be Fabricate using Fabduino

- The scobond Sheet will be mill

- The Axis "wheel" will be fabricated like the Lasersur solution

- I am trying to make coupling

Building it

http://www.youtube.com/watch?v=e4BExDdkLu4&feature=youtu.be

- – - What more – Mill the scobond boards when they arrive to cover the machine

- – - study and make a controller for the Civan's Laser

Problems – My 1/64" drill bits are destroyed so I need to find a place to mill my fabduildo, motor controllers …

Some electronic components havent arrived yet

The Z T P motors haven't arrived yet

https://docs.google.com/spreadsheet/pub?key=0AhWz1JfIMom8dExEblhBREdLY2pieVFiMDVpWk90TkE&output=html

https://docs.google.com/open?id=0BxWz1JfIMom8NFJ3SENnZjVMb1E

https://docs.google.com/file/d/0BxWz1JfIMom8aGVldnVORkRIaWs/edit#