3. Computer Aided design

I can not currently do 3D schema of my project because it does not nescessite particular construction it is a cloth glove (which I have to define)

Finalizing my project:

My final project will be to adapt the wilder mouse (see Wilder week2) in a glove that would do the same actions in a more intuitive way, with the help of a mobile interface. The two options that could allow me to realize this system would be an accelerometer and / or an infrared system.

I want to turn this mouse into an adjustable glove for all hands that allows to do the same actions with more ergonomics

Move For Zoom In / Out.

Moving on the screen.

Comparison between infrared technology and an accelerometer

Infrared Technology.	Accelerometer.
Infrared is an electromagnetic wave, whose name means “below the red”. The infrared wavelength is between the visible range (≈ 0.7 μm) and the microwave range (≈ 0.1 mm). Infrared is associated with heat because, at ordinary room temperature, objects spontaneously emit thermal radiation in the infrared range.	An accelerometer is a sensor which, fixed to a mobile or any other object, makes it possible to measure the linear acceleration of the latter
Infrared transmission at a maximum range of 30 m without obstacle. It has only one channel and is sensitive to light interference.	Each family of accelerometers has advantages and disadvantages, it is obvious that the quality of the measurement depends on the choice of the good accelerometer, it must be chosen according to the application but also according to its quality.

Materials for the “core” of the glove:

The textile for the glove should be adaptable to any large / small hands, I think used an extensible fabric to allow a better comfort and facilitate the use