Project development
What tasks have been completed? what tasks remain? and what is the deadline?
As I'm starting the final project a little bit late so I have to finish it as soon as possible and dedicate almost 100% of my time that's why I'm not mentioning a specific dates.
| no | Task | Progress | link |
|---|---|---|---|
1 |
Choose pictures to be 3D printed and print it. |
Experminting the cocept has been made through trials in wild card week. |
|
2 |
Design an enclousre box to hold the 3D printed photos, The LEDs and all the control circuits. |
||
3 |
Fabricate the enclousre. |
||
4 |
Design a circuit that can capture the audio signals through an electret mic. |
Has been completely done at Input devices week. |
|
5 |
Fabricate and test the audio signal circuit. |
Has been completely done at Input devices week. |
|
6 |
Design a circuit that can control 4 LEDs' units( Transistors bridge circuit+ LEDs circuits). |
Has been completely done at Output devices week. |
|
7 |
Fabricate and test the transistors bridge circuit |
Has been completely done at Output devices week. |
|
8 |
Fabricate and test the LEDs units circuits. |
Has been completely done at Output devices week. |
|
9 |
Communicate between the audio signal circuit and the transistors bridge circuit |
Test communication has been made at Networking and communication week. |
|
10 |
Write the final programming code |
Reading the audio signals has been successfuly made at Input devices week and controlling thr LEDs has been successfully made at Output devices week. |
|
11 |
Integerate all of the above together. |
||
12 |
Prepare a video and one slide. |
What have you learned?
For me the most important thing that I learned from Fab Academy is that if you decided to make something and you made your research very well in addition to having the basic knowledge definitely you will successed. Before starting the academy I had no idea about many topics like molding & casting , API, Networking and communication,..... etc. Now I'm working on a project where you can control leds with sound signnals. I was able to do the electronics and coding, read datasheets , know how to code registers, make signals visiable and using multiple digital fabrication methods. This is amazing.
