project completed
Agriculture and technology in Peru, Seed ready
The farmers of Madre de Dios have difficulty implementing state-of-the-art equipment since at the time of maintenance they do not have personnel or when it fails they do not have how to repair it and they lose money for it. With this basic but very useful module, the aim is to facilitate the drying of these seeds and improve the quality in the process. For this, I will use an ambient temperature sensor,an ambient humidity sensor , a fan, some heating plates, a microcontroller to be able to program and control all the sensors, a motor to vibrate the plates where the seeds will be found and these are rotating continuously
Final integration of all system components
Me with the wrong tool
Me with the right tool :D
Video of the dryer module working
FINAL PRESENTATION
You can see my final Fab Academy presentation here.
You can see it at minute 1:20, I was almost halfway through the video. It was very fast!
If you got this far by reading my project, I congratulate you, try to make it as detailed as possible, if you have any questions, don't hesitate to find me on my social networks.
The day of my presentation
What Neil told me and I fixed it
Neil said: not clear from the video what part are working and so it just it needs to go a little futher to show like stting the temperature and reading the temeperature. or you know just. That does the function. but then it looks like a lot of work and a useful project.
I adjusted my video, placed the part where the heater is activated and then the fan, explained a little more up to that point how my drying tests were, of course it was improving. But I added what was necessary to make it understandable in the video, and it's ready. Recommendations, showing how the system works is important, focus on them.