Week 16

May 17: Applications and implications

Propose a final project masterpiece that integrates the range of units covered

Answering:

What will it do?
It will a pannier belt that will have different led light programs that I can change between with the press of a button, it is an accessory for festivals, performances, pride parade and parties.
Who's done what beforehand?
I have never seen a pannier belt with lights or spikes but I got the idea from looking at Videnoir pannier belts and wanted to make one more fitted to my style
What will you design?
The hip cage, the screw on spikes the pattern on the fabric and the electronics.
What materials and components will be used?
Led stripes, 4mm HDPE, see-through gray HTPLA, XIAO esp32-c3, black spray paint, bunch of superglue, a staple gun, see-through fabric, black textile vinyl, plastic material from last year’s Halloween costume, hot glue gun, silicone covered wires, button, copper board, connecting pins and an elastic band.
Where will come from?
Leftovers - 4mm HDPE., see-through fabric, plastic material from last year’s Halloween costume.
From the my lab - a staple gun, black textile vinyl, hot glue gun, silicone covered wires, button, copper board and connecting pins.
Seeedstudios - XIAO esp32-c3.
Amazon- Led stripes.
Local hardware store (BYKO) - bunch ofsuperglue.
Local nerd store (NEXUS) - black primer spray paint.
Local crafts store (A4) - elastic band.
Local 3D store (3D verk) - see-through gray HTPLA.
How much will they cost?
Leftovers – 60x40cm 4mm HDPE, see-through fabric, plastic material from last year’s Halloween costume. = 65$
From the lab - staples, black textile vinyl, hot glue gun plastic, silicone covered wires, button, copper board and connecting pins. =22$
Seeedstudios - XIAO esp32-c3.= 5$
Amazon- Led stripes = 73.52$ used 2/3 so 49$
Local hardware store (BYKO) - bunch of superglue. =3 g is 10$ in Iceland and bought for around 100$
Local nerd store (NEXUS) - black primer spray paint. = 14$ only used a bit so 2$
Local crafts store (A4) - elastic band. = 5$
Local 3D store (3D verk) - see-through gray HTPLA. = 42$ only used a bit so lets say 5$
All together = 253$
Could have been = 184$ If I had just bought black plastic and not had to spray and cover the white left over plastic I used
What parts and systems will be made?
The hip cage, screw on spikes and electronic circuit
What processes will be used?
3d printing, cnc machining, electronic production and vinyl cutting.
What questions need to be answered?
There are no questions that I can think of exept will it look as gorgeous as I hope it will.
How will it be evaluated? Like everybody else’s project it has to have input and output, 2D and 3D design, additive and subtractive fabrication processes, electronics that I made and look good, no wires everywhere or anything like that.