3D Printing - 3D Scanning
Here's the video of the lecture about 3D Printing and 3D Scanning from Opendot/WeMake in Milan. It is based on the Digital Fabrication Studio course I've been lecturing at Aalto University - School of Art, Design and Architecture - Department of Media - Media Lab Helsinki.
Unfortunately the video was recorded incorrectly, but you can hear the voice here and watch the slides below.
3d scanning Video tutorial
Slides of the lecture
3d printing Video tutorial
Slides of the lecture
Original tutorial by:
- Massimo Menichinelli openp2pdesign | v1.0 |
Licensed under a Commons Attribution 4.0 International License