Within this week, the main goals were:

1. Shown how you made and programmed the board

2. Explain any problems and how you fixed them

3. Included a ‘hero shot’ of your board.

Below is a walk through on how I achieved my goals for week with the use of Eagle.

To accomplish this task, I looked through the work of my peers that did fabacademy before and picked a project from one of the 2016 students of Fabacademy at FabLab Rwanda, Lambert Rulindana.

From this site, to make my own FABISP. the pictures below show how I went about it step by step.