2D Design

Within this week our main goals were:

1. Model experimental parts of a possible project in 2D and 3D software.

2. Show how I accomplished it in words/images/screenshots.

3. Include my original design files.

Below is a walk through on how I achieved my goals for week.

Modelling an experimental part of a possible project in 2D and 3D software.

To accomplish this task, I empoleyed one 2D software For both the raster design and the vector, I used coral draw

After spending a few hours, I got to accomplish this tasks. the delay waas mainly due to my minimal prior knowledge regardinng design software. Below are pictures showing how I did this work.

The above shows the text before I could convert the rasterized image(text and shape) into vector form. To convert it to a vector, I did the following:

1. I selected the image, right clicked it and selected "convert to curves".

2. I then selected hairline from the menu bar.

The image below shows the vector form of the image.

3D Design

to accomplish this, I used solidworks software

Please do check out the next assignment!