Week 17: Machine Design

Individual assignment

This week we will complete the design of the machine and correct some mistakes.

Design

The wiring designs between the engines and the route of the x-y axes were completed.

Avatar Fig.01 - CNC

As an extra design, design a box that will serve as protection for the drivers and board of the CNC. The design was made in the rhino program and the pieces were exported in dxf to be cut in the laser machine.

Avatar Download Box Files
Fig.02 - Box CNC

To establish a rigid connection between the axes of the motors, design support pieces for the cables.

Avatar Fig.03 - Supports

These fit perfectly without getting in the way of CNC parts.

Avatar Download
Fig.04 - Support

For the cables of the z-axis, a piece that works under pressure was designed, the union of the cable support generates pushes the internal walls of the piece which allows to work as a hook and remains rigid in the aluminum rail. In addition, when cutting the base, the support of the X-Y axes cables that are based on the CNC was created.

Avatar Download Box Files
Download Box Files
Fig.05 - Supports

To see all the documentation of the group work, you can visit the CIT page.