3D Scanning and Printing | Week 6

3D Printing

I found this link https://blog.astroprint.com/the-ultimate-3d-printing-cheat-sheet/ as a perfect sourse to understand and check resoureses reagarding 3D Printing.


I have designed parts for my final project and 3D Printed it.

  1. Servo Wheel | GCODE File
  2. Servo Motor Holder | GCODE File
  3. Castor Support | GCODE File
  4. Sensor Holder | GCODE
  5. Circuit Holder | GCODE

3D Scanning using Remake

3D Scanning

Scanning a body with details of its structure and then converting it to a CAD model with Trianlage geometry which be printed of casted.

Autodesk Remake
Step 1 Download ( Education Version) Link | 950 MB
Step 2 Setup

Step 3 Login
Autodesk Product require Login as this is Cloud based Product it store your photos to cloud and process them.

Step 4 Project
Select Photos and Upload.
this will upload photos to Autodesk Drive and Process
After Process it will show where to store output file.
Output extension is in Format

Step 5 Mesh Model
Mesh Model of Kano




Project Done for 3D Printing

Looking for a design for Hinge and interconnection for sensor box. I will Use it in making Holder for Ultrasonic Sensor
Problem Faced
    Scanning from Phone ( object should be steady or Phone if few photos submitted wrong for remake it will spoil your other image ref. so check before uploading)

3D Printing

Going to make a whistle in 3D printer. Designing it in Fusion 360.Output is in stl format.
Then making gcode file from it by using Cura.


Files

Group Work

http://archive.fabacademy.org/2018/labs/fablabcept/3d-printer-week-06.html

Some Quick Points

^ Top