Week 16: Wildcard - Molemohi Kapari

Assignment Overview

Individual assignment: During Wildcard Week, I explored digital embroidery a technique not previously covered in my assignments. My objective was to test and fabricate a UniPod embroidered logo using computer-aided design (CAD) and computer-aided manufacturing (CAM) processes, while thoroughly documenting each step to ensure reproducibility.

Design overview

This is the logo used for this assignment

Performance Testing

1. Embroidery machine used

Dahao Embroidery A15

Dahao Embroidery Machine Setup Guide 1. Initial Checks

Ensure the machine is connected to a stable 220V AC power supply.
Confirm the emergency stop button is not engaged.

2. Thread and Bobbin Setup

Upper Thread: Thread through tensioners, guides, and the needle (front to back).
Bobbin: Load a wound bobbin into the case and insert into the hook assembly.

3. Load Design File

Insert USB or connect via LAN if available.
Use the panel: Design Management->Read Pattern.
Select a compatible file format (.DST or .DSB) and confirm.

4. Configure Settings

Color Sequence: Assign needle numbers to each color stop.
Embroidery Position: Use origin or frame centering tools to align design.
Speed: Set to 600–800 spm for initial tests.

5. Hooping and Material Setup

Stabilize fabric with tear-away or cut-away backing.
Mount the fabric securely in the hoop and attach to the machine.
Use the Trace button to verify design fit within the hoop area.

6. Run Test Stitch

Lower the presser foot.
Press the Start button to begin stitching.
Observe the quality of stitching and thread behavior.

7. Adjust If Needed

Tweak thread tension for proper balance between top and bobbin threads.
Reduce speed if thread breaks occur.
Adjust design origin for better positioning.

8. Custom Design Integration

Create embroidery designs in software like IsewEmCad.
Export the design as a .DSB file.
Load the design as in Step 3 and repeat setup.

Tip: Always test on scrap fabric before final embroidery to avoid damage or misalignment.
Embrodery

Import image in IsewEmCad software
IsewEmCad is embroidery CAD software developed by Dahao for creating and editing embroidery designs. It is often bundled with embroidery machines that use Dahao controllers (like A15, A18, or C18), and is used to convert vector images or manually create stitch patterns that can be exported to machine-readable formats such as .DST or .DSB.

Installation