Final project
Tot be? is a lamp that grows with a person's life adding shells that tell their personal story like a totem pole. Each shell explores another material and fabrication process, while the structure includes the hidden electronics.
License
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International
Files
- Lasercut Base
- Lasercut Shell
- 3D-printed Shell (PETG)
- 3D-printed Shell (Clay)
- 3D-printed Structure (PLA)
- Main & Button PCB
- Parent Code
- Child Code
List of materials
- 3D-printed structural pieces: Polymaker PolyTerra PLA (a few cents)
- 3D-printed shell: Polymaker PolyLite PETG (a few cents)
- lasercut shell: Plakene Polypropylene (2-5 euros)
- lasercut base: Birch Plywood 4mm (2-7 euros)
- neopixel strip: Seeedstudio Grove 1-m (10 euros)
- 34 magnets: 6x2mm circular neodymium magnets (2-4 euros)
- pcb: double-sided copper clad board (1-5 euros)
- wire connection: WAGO inline connectors 221 (2-7 euros)
- AC/DC converter: AC/DC converter/USB (1 euro)
- USB cable: USB A cable (1 euro)
- 3x SAMD11 microcontrollers: ATSAMD11C14A-SSUT (3 euros)
- 3x voltage regulators 3.3V 1A: TC1262-3.3VDB (1,80 euros)
- 6 resistors 5k Ohm: RC0603FR-105K1L (a few cents)
- 6 capcitors 1 µF: Kemet C1210X105K5RAC3316 (a few cents)
- 3 LEDs: SM0805UGC (a few cents)
- pinnheaders: CONN HEADER SMD R/A 36POS 2.54MM (a few cents)
- smd pinnheaders: Males Header Dual Vertical (a few cents)