Electronics
Production

Electronics Production

• Group assignment:
  • Characterize the design rules for your in-house PCB production process: document feeds, speeds, plunge rate, depth of cut (traces and outline) and tooling.
  • Document your work (in a group or individually)
  • Document your work to the group work page and reflect on your individual page what you learned
• Individual assignments:
  • Make an in-circuit programmer that includes a microcontroller by milling and stuffing the PCB, test it to verify that it works.

FabISP: Programming

1. To program the FabISP, you first need to install the necessary software for your operating system and download the firmware.
2. Then you edit the Makefile
3. Set the fuses / program the board
4. Verify that the board is working properly
5. Then you need to open up the jumpers to make it a programmer

Well, as I said, my strong point is not electronics... but hey, test and test.... this week I learned that Ubuntu was the same as Windows.... we still don't have the machinery at the institute...

Although we don't have our lab finished yet, we're making progress on the design and, well, I'm learning a little about electronics. I learned about the components of electronics....