Final Project

Final Project

  • Developing

Here thinking what to do....what does it do... what will it do... well my final project, it is an intelligent piggy bank, and ps what it will do, it will remind you to save,

Figure
Figure 1

who has done it, well there are piggy banks already made, existing in the market, I only gave added value to my final project, which is the solar panel and an interactive design for the little ones in the home

Logo
Figure 2
Figure
Figure 3

well do all the design part, in inskape, in tinkercard, corel, among others.
I will use the 3d printer, the electronic part with some processors, to turn on lights and vibration, and the leather will be covered with a material similar to silicone, to make it pleasant for children.

Description:
my final project is to make an interactive piggy bank, which will be regulated by a controller, which will be every fortnight and at the end of the month.... and will have a battery made by solar panels
Design in 2d and 3d, the figure was covered by a silicone material.

Figure
Figure 4
Figure
Figure 5
Figure
Figure 6

References

Describing my process

Orange and Violet Simple Startup Business Animated Presentation de Cindy Marilyn

ELECTRONICS DESIGN AND MANUFACTURING

  • At this stage, I realized that I had to have more than one board design, I made two boards, one of them burned while trying to solder and the other one was ugly but it worked….. I ran tests to see if it worked and it did.

    • ELECTRONIC DESIGN AND INTEGRATED PROGRAMMING

    • I based my design on the design of an alarm clock in order to understand how it works and to be able to program in ARDUINO IDE without problems and in a very simple way. But my design has modifications, mainly because I had to place part of an alarm clock and also have it vibrate and turn on lights so that it is according to the needs of my project. This board was the most difficult, because I had never done board making and I don't have much knowledge in electronics…. But it could

      • CONCLUSIONS

      • • There is a lot of room for improvement in the design, such as the location of the power supply or even more internal spaces to store products. I intend to develop a more aesthetic version of this prototype and at the lowest possible cost. • I am very happy to be part of Fab Academy, it helped me develop different skills and learn to work from the simplest to the most complex, but the most I learned is not to give up and keep working.

        • DOWLOADABLE FILES

        • •Programming • Schematic • BDR • 3d design