Computer Controlled Machining
Group assignment
Group assignment:
do your lab's safety training
test runout, alignment, speeds, feeds, materials, and toolpaths for your machine
ShopBot PRSalpha
advanced technology for CNC cutting, drilling, carving and machining, the PRSalpha series tools deliver rapid transit speeds of 1800 inches per minute and cutting speeds of up to 600 inches per minute.
![](../images/PRSAlpha.jpg)
ShopBot builds CNC gantry tools in many sizes to suit the varying needs of manufacturers: 96 x 48, 96 x 60, 120 x 60, 144 x 60.
Specifications:
XY Move Speed (with full cutting force) | Variable, max. 15.24m/min. |
Z Move Speed (with full cutting force) | Variable, max. 9.14m/min. |
XY Positioning Speed | Variable, max. 45.7m/min. |
Z Positioning Speed | Variable, max. 22.86m/min. |
Step Resolution | 0.0127mm |
Positional Accuracy (no load). | +/- 0.076mm |
Linear Cutting Force | Approximately 68 Kg |
X and Y Axis Drive System | Rack and Pinion |
Z Axis Drive System | Rack and Pinion |
Input Voltage | 110 volt (30 amp); or 220 volt (15 amp) [Single phase, 50-60Hz] VOLTAGE must be specified at time of purchase. The PRSalpha requires a fused disconnect installed by a licensed electrician. Spindle may require 3 phase. |
to know about machine visit it official site
Lab Safety:
Cleaning Before and After Use is a good practice to follow with any machine but this machine create lot of dust so wearing mask is important
![](../images/shopbot (1).jpg)
![](../images/shopbot (2).jpg)
This machine is open and work under high speed and stress so It can be dangerous to anything wrong. There are safety instruction written on machine itself that needed to be follow
![](../images/shopbot (3).jpg)
![](../images/shopbot (4).jpg)
Ear safety is must bacause It make Loud noise when it cut plywood... Good to keep this machine in separate room where it will not disturb others works
![](../images/cncpic (21).jpg)
Here bit is cover with plastic to prevent dust from spreading. This bit work on speed and power and can be broke if not used properly or due to any reason. Broken piece will shoot out surround can hit someone like bullet came out from gun so safety gear and safe distance so be considered
![](../images/shopbot (6).jpg)
![](../images/shopbot (7).jpg)
Here is setting we all use in cutting our shapes.
![](../images/cncss.jpg)
Some Beautiful group moments. Here miss. Apeksha have supported us she is fab group member and local instructor.
![](../images/group1.jpg)
![](../images/group2.jpg)