****************************************************************************************************************
ASSIGNMENT: MODEL (DRAW,RENDER,ANIMATE,SIMULATE) A POSSIBLE FINAL PROJECT AND POST IT ON YOUR CLASS PAGE
PROJECT: PHOTOGRAMMETRIC FAB SCANNER
SOFT: RHINOCEROS // GIMP // INKSCAPE
NOTE: FINAL PROJECT HOME PAGE
DOWNLOAD:
****************************************************************************************************************
The Photogrammetric Fab-Scanner is a cylindrical box, whit 50 cm of diameter.
It's composed from 3 different parts, that work in direct relationship :
- A - The Light Box
- B - The Motorized Stepper Dish
- C - The Motorized Camera Curved Rail
The object to scan will be set on the rotating dish.
With the lock down of the back doors of the scanner, the process starts:
--> the led lights on, and the photographic camera will take a picture each 15° angle of the rotation support (24 photos).
--> Once the 360°rotation completed, the camera moves in the new positon, and the process "rotation / shooting" start again.
--> The radial movement increases each 45°.
--> The complete process it's composed from 4 differents positions in the camera rail: 0° / +45° / -45° / + 90° (require just 1 photo)
-->Each of it, corresponds to a 360° rotation dish and a set of 24 photos.
