Design and produce something with a digital fabrication process (incorporating computer-aided design and manufacturing)
Demonstrate workflows in the process.
Choice and apply suitable materials and processes to do your assignment.
This week I use the digital sewing machine( Janome Memory Craft 15000 )
I followed Salama’s instructions to process the sewing.
First, I google a picture of tree and write my letter near it.
I must choose the hoop size FA10 100X40 hoop.
I watch the video then I setup the fabric into the hoop by placing a paper.
Then secured it by tightening the screw.
I opened digitizer which is a kind of software I use to digitize the pictures and produce a toolpath for the machine.
First, I selected the hoop size.
Then insert my picture by going to Auto digitizer >> Insert artwork.
Select the photos I need.
I clicked on Auto digitize instant embroidery( digitized the image)
I write my letter by going to lettering.
I saved the file in to a USB.
Plugged the USB in the machine.
I needed to fill the top and bottom threads, I filled it with pink.
The first object was the tree the machine did it very well!
The final result: