Final project Video and slide.

With my project vibradrop i learned how to create something from scratch using relevant technologies available. The main aim here was to create a setup which can produce optical illusions with water, since it is always mesmerizing to watchwater flow. I have succeeded in creating the illusion. But still i have to make this process more interactive by making it a speaker which creates patterns of water with the music. And also for interface instead of using rotary encoder i used a switch . So in future i want to make a more user friendly interface.

Final project slide with important components and methods used for production.

THis is my final presentaion video and shows its working and methods used for production.

Machienes used

  • Laser cutter
  • Hot air blower>
  • Ultimaker 2
  • Modella mx20
  • Soldering
  • Signal generator
  • Vinyl cutter
  • Softwares used

  • inkscape
  • gimp
  • Fusion360
  • Eagle
  • Arduino IDE
  • Signal Generator
  • Bill of materials

    Bill of materials

    Speaker magnet 3 $ 2 (Rs 150)
    water pump 2 $ 4( Rs 300)
    sound Amplifier 1 Salvaged
    Flexible water hose 5mm 1 m .2 $( Rs 20)
    Acrylic 3 mm 3 sheets Inventory
    PLA filament Few meters Inventory
    6x4" single sided copper board 1 inventory
    N chanel mosfet 30 A 4 Inventory
    RGB lED strip 2 meter Inventory
    Volatage regulator 4 Inventory
    Resistor Inventory
    Switch 1 Inventory
    20 Hz crystal 1 Inventory
    Terminal block 4 Inventory

    So in total the bill comes around 6.2 $(Rs 470)


    Design files

    Electronic board files

    Laser cutting dxf files

    Main design files

    Design files

    Gcode files

    Vinyl files

    Program files

    Licensing

    Creative Commons License
    Vibradrop by Eldho Kurian is licensed under Creative Commons Attribution-NonCommercial 4.0 International License.

    Credits and thanks

    I take this oppourtunity to thank our Lab Instructors Yadhu Sharon, Jogin Francis and Joel George Alex for their constant support and advise through out the academy, And big thanks and hugs to my collegues Tom, Eldho, Nanditha and Nibin who where there always with me brainstorming new ideas and possiblites and constantly behind the works I did. This year indeed was a unique year with everything happening around the world. Constant support and effort from everyone lead to completion of my project and weekly assignments, i would also like to thank Tom Thomas, project director of KSUM for letting us inside the lab even when, the circumstances were not favorable to open the lab. I would also like to thank the Fab Academy Team for letting me join the academy that have showed me the new possiblities in Digital Fabrication.