4. Computer controlled cutting

  • Adjusting Focus

  • Checking Speed, Power

  • Checking the manual printed on the machine the parameter to set up according to the material i'm gonna use. I'm going to use 3mm basedwood. Apparently in my case i should use the power 90, strength percentage 70%, and speed 30mm/s. By the way the machine from our Lab it is "大族激光"

694c88508ff01a2812b7c4cc15242848.png

9da892f86e5afc25b136fe8ab04f5804.png

a9e41d6f2e3da87901308ffdf2e94da3.png