This is the week 14 of fab academy and this week is all about the machine
desigining, this week and the week#16 is for mechanical design and machine design. In these two week there is no individual task but there is just group task, In group we have to make a Machine .
TASKS:
Group assignment: Design a machine that includes mechanism+actuation+automation.
Build the mechanical parts and operate it manually.
Document the group project and your individual contribution.
This week's assignment is that we have to design machine that include mechanism, actuation and automation. Considering to above requirements we looked at number of ideas among which vending machine was at
top because of it's need and advantages. A vending machine is an automated machine that provides items such as snacks, beverages, cigarettes and lottery tickets to consumers after money, a credit card, or specially
designed card is inserted into the machine. The first modern vending machines were developed in England in the early 1880s and dispensed postcards. Vending machines exist in many countries, and in more recent
times, specialized vending machines that provide less common products compared to traditional vending machine items have been created. For designing the vending machine we are using this useful
link.
Seage small vending Machine
Benifits of having a vending machine
Easy Management: These machines are so easy to manage as nobody has to be there to sell any goods. All that needs to be done is the machine’s installation, and then you can simply monitor it’s progress from afar.
There won’t be any payment problems either, as an instant cash payment is needed to buy items.
No Overhead Costs: Operating vending machines carries no overhead costs as you eliminate the need for employees who sell food. You don’t have to worry about monthly wages and pay rolls, and there’s also no need
for you to rent any extra work space.
Time Saving: No precious time will be wasted preparing a beverage, as a hot drinks vending machine can dispense a drink in around 20 seconds, saving loads of time!
Diversity of Products: The wide range of products can be sold using vanding machine for example fruits, the beverages, the drinks, and the snacks among the other products.
Working Capability: Vending machines work 24 h day 365 days a year , They need neither stuff nor specialized attention , They does not take a long time , You will need short time to keep them serviced and stocked with
the products .
Machine Composition
Machine is composed of following parts
Six discharging units.
An LCD.
Coin detection.
Cashless payment system.
Task Division
In order to make it possible we divided our work individualy as given below.
CAD Modeling (Tariq)
CNC Milling (Haider)
Electronics (Zeeshan)
Programming (Azmat)
Wireless Communication and Mobile Application (Ali Raza)
CAD Modeling
This week's requirement is to design the mechanical design so for that our machine's body is primarly made of mdf cardboard. Cad modeling is part of our group member Mr. Tariq Shaikh where he used solidworks
software for designing the mechanical design of vending machine. The cad is comprised of different parts like base part, back part, six discharging units and front panel with cash less payment and coin detection
system.
All of the parts are shown below in figure:
(a) Rendered assembly image is also shown figure.
(b) which looks real image of machine.
(c) shows the acrylic based front side of vending machine which shall be laser cut after cnc machining.
CAD parts
Rendered image of CAD Model
Front Panel made of Acrylic sheet in solidworks
In order to avoid mistakes in cnc milling we initially laser cut the designed model by using cardboard with thickness of 4mm. Press-fit laser cut model is shown in figure below. From this laser cut we observed that
there is no any such error in design therefore we can now move to cnc milling just to get the actual design.
Laser cut of cad design
CNC Milling
My contribution.
This part was done by ME. In cnc milling we normally use Vcarve software for generating toolpaths. Before generating any tool path I used dog bones in order to pressfit the design
accurately and used tabs at various points just to hook up the parts in mdf card board. Since we are using the Liquid crystal display (LCD) so for that I used pocket toolpath and for cutting We used profile toolpath.
The generated pocket tool paths, profile toolpaths and 3d view of toolpaths is shown below in figure(a), (b) and (c) respectively.
Furthermore it can also be seen in figure (a) that there is joint between two
parts i-e front panel which is minor mistake and was resolved after cnc milling.
V Carve pocket toolpaths
V carve profile toolpaths
3D View of toolpaths
I tried to cut this in shopbot where we used laminated 16mm thick mdf sheet. After cnc milling we assembled this machine in a team and proceeded further. The cutting process and assembly of design
is shown figure (a) and (d) respectively. Furthermore we laser cut the front panel which is also shown figure (b) and (c). It was nice experience to work togethor.
3D View of toolpaths
An acrylic white sheet is used to cut the fron panel of vendig machine. In order to give it a look we just wrote the name fab lab khairpur and vanding machine at upper side of the panel. video shows the
cutting process. All of the process was carried by our mate Tarik as he was assigned this part in group.
