My first idea - Mesh Weather Station¶
It is the creation of a series of weather station communicating between each other with a mesh communication (Z-wave for example). There would be one station in each room of the FabLab where I work. The collected data would be send to a web page to have them centralized.
Data collected would / could be:
- Temperature
- Sound
- Moisture
- CO2
- Particles
Design Ideas¶
Each station could have a different look to blend in into its environment. But that is only for aesthetics.
Why not also create a little LED Table with LED that could signal if there is an issue in one of the FabLab rooms ? (Idea came while doing the KiCAD Intro with repeating LED patterns example.)
Simple Box¶
Educative Idea¶
It is somewhat similar to this project but different in a way as it will use pins to just fix the components and not being conductive as a normal breadboard.
Transparent/translucid Wood¶
Maybe having a transparent wood panel one ?
¶
Electronic Stuff¶
Mesh¶
¶
Others¶
project and other things that could be useful later on
- FabriXIAO
- KitSpace
- PCB Design Sharing site
- Levitating weather station - FabAc.17
After Presentation Infos:¶
- SDS011 Air Quality Sensor experiment
- Environmental Dimensions of Additive Manufacturing and 3D Printing
- Raspberry Pi Pico Long Range Radio (LoRa) Weather and Air Quality Station
- SmartCitizen
- OPENAIR Best Practice Guide for smart air quality monitoring
- Sensing device performance evaluation methodology
- Raman Spectroscopy
Second Idea¶
Change from just a weather station to comparison of DIY and commercial option