5. Electronics production¶
Electronics Production Individual Assignment¶
Electronics Production, Assignment site
- Make and test a microcontroller development board
Electronics Production, Group Assignment¶
Electronics Production, Group Assignment site
- Characterize the design rules for your in-house PCB production process: document feeds, speeds, plunge rate, depth of cut (traces and outline) and tooling.
- Document the workflow for sending a PCB to a board house
- Document your work to the group work page and reflect on your individual page what you learned
Design Rules for our MDX-20¶
- See images:
1st step get the files ready via Modsproject¶
- Open https://modsproject.org/
- Right click select programs -> open program - > Select MDX-mill PCB
- Select png file
- Change origin x to 0
- Change origin y to 0
- Turn on input outgut to file save file
-
Turn off input output to webserial
-
Select mill traces 1/64”
- Save the rml file.
Get the Modela MDX- 20 Ready¶
- View mode
- Put the 1/64 inch bit
YouTube tutorial¶
Open Roland MDX20 Control Panel (SimplyFab-20)¶
- Select COM port 4 (C)
- Select the point to zero the Z
- Click on Z0
- Lower down the bit
- Click around 12 times on Z up
- Select point for xy
- Press Set xy
References¶
A big thank you and shoutout to Eduardo Chamorro in Fab Lab Barcelona :)