1. Computer controlled cutting

Welcome to the third week, during this week we work on characterizing lasercutter's speed, power, rate etc, as well as the vinylcutter and the parametric construction kit. The outcomes will be described and broken down as below:

Lasercutter

Power and speed test

With Fusion were designed the laser cut test on the MDF material and tested on the 3,3 mm MDF material.

Parametric design

In this part I added variables for doing it in the parametric designed and so, cut on the lasercutter as it is shown.

Here the Magic!

First, I was starving, so I toasted a snack

Now the assigment

Here the construction kit were developed hehe xd.