Skip to content

WEEK 10 mecanical design, machine design

GROUPE LINK

FOR I was the mechanical designer of the machine’s system.

OBJECTIVE

         our project is to make an automatic tray
         for scanning 3D objects via a telephone

what i learned

I learned how to use the component script on fusion 360.

  • [X] use script to generate a gearwheel

    • open Fusion 360

  • create a sketch

  • open the utilities tab

  • Then open ADD_INS

  • select SpurGear you have to enter all values

    in my can : D = 12 mm teeth = 15 mm

don’t dreat but RUN it

  • finish the Sketch

result

save it as STEP FILE

Solidworks

I continued on solidworks to finish the project.

**Why, because without internet i can work on the projet.

step:1 Create a part

step:2 select a plan

step:3 a sketch in my case begin by cercle but i created a new sketch on the gear plan

assembly

**OTHER DETAILS

this piece represents the modeling of the crown

this part is used to assemble the gearwheels in our system.

WHY ASSEMBLY ?

I assembled the machine to see its appearance and mechanical constraints.

what i learned

i learned, woking in groupe.

i learn more thing from solidWorks like :

      - rendering
      - make a parametric assembly 
        - open a DXF file

All Machine files


Last update: July 8, 2023