18. Invention, intellectual property and income

assignment
develop a plan for dissemination of your final project
prepare drafts of your summary slide (presentation.png, 1920x1080)
and video clip (presentation.mp4, 1080p HTML5, < ~minute, < ~10 MB)
and put them in your root directory

Here is the plan for the dissemination of my final project:
My final project is a part of the "Quantum Technology FabLabs (QuFabLab)"-project I am working for.
In this project we want to educate pupils, students and ingenious in quantum technology.
My final project serves to illustrate the functionality of a quantum sensor with a diamond with nitrogen vacancy centres.
The setup shall be published under the Creative Commons-Licence: CC BY-ND 4.0

Here you find informations about this licence:

https://creativecommons.org/licenses/by-nd/4.0/deed.de

In short: You are allowed to reproduce and redistribute the material in any format or medium for any purpose, even commercially. The licensor cannot revoke these freedoms as long as you comply with the terms of the licence. But: you must give appropriate credit, include a link to the licence and indicate if changes have been made. This attribution may be given in any reasonable manner, but not in a way that suggests the licensor is endorsing you or your use. And: if you remix, modify or otherwise directly build upon the material, you may not distribute the adapted version of the material.

Video:
First I will explain my goals and the functionality of my ODMR device using an animation and an exploded drawing.
Then I will show videos of the fabrication process of the: 3D printing, pcb milling and so on.
Then I will show the functionality of the reliant mechanism.
Finally, I will show the functionality of the whole ODMR device, meaning that the measured light intensitiy will decrease when a magnet is brought in the near of the diamand.

I don't plan to add music to the video, but to add audio explanations.

Here you see a first exploded drawing of my ODMR device, which will take up the main part of the summary slide:

Here are some of the videos I want to include in the final video clip:

Here you can see a time-lapse recording of the 3D printing of the reliant mechanism:

And here you can see a time-lapse recording of the milling process of a pcb: