After the two images are ready, I opened Mods and import the first image Trace.

And for the second image too.

Next it's time to use Roland SRM-20 to make the PCB.

After around hour, the board became ready.

Now it's time to solder the components.

My PCB needs the following components:

1. Atmega328 >> 1
2. Voltage Regulator 5v >> 1
3. Resonator 2o MHz >> 1
4. Capacitor unpolarized 1uF >> 3 (2 with V.R and 1 close to the IC)
5. Capacitor unpolarized 0.1uF >> 1 (AREF)
6. Slider Switch >> 1
7. Resistor 300 Ohm >> 1
8. Resistor 10 KOhm >> 1 (Pullup resistor)
9. Resistor 0 Ohm >> 5
10. Power Header >> 1 (Terminal)
11. ISP Header 3x2 >> 1
12. Header 2x1 >> 45

---